CONTACT US

Or "Call us on 07802 348 096"

You are looking over your shoulder, squeezing into the last parking space, when….Crunch!! Come to us, we are the experts at Alloy Wheel Repairs!!

Blemishes on alloy wheels can spoil the appearance of even the smartest looking vehicle. Replacing alloy wheels can cost hundreds if not thousands of pounds. Restoring the finish of your wheels not only makes your whole car look like new again but can also help to maintain it’s market value. That’s why our Alloy Wheel Refurbishment Service represents real value for money.

We operate a dedicated Wheel Repair department at our "Alloy Wheel" Repair Centre in Liverpool. Here we can restore the finish to all types of alloy wheels.

We can expertly repair:

Kerb Damage - The most common type of wheel damage

Important Information:
Some of our competitors repair just the damaged area or the very edge of the rim but charge for a full repair. We always put quality first and refurbish the whole face of the wheel, however, we can perform a cosmetic repair for those on a budget.

For an honest, professional service, just call us 07802348096 or
0151 493 2600, we’ll be happy to advise and give you an initial quotation!!.

	KERB DAMAGE

Corrosion - Caused by Road Salt, Acid Erosion or Oxidation of the Alloy
 

	CORRODED ALLOYS

Discolouration – Caused by improper use of cleaning chemicals/brake
dust contamination
 

	DISCOLOURATION

Polished Alloy – We can restore these wheels to their polished condition, however, regular cleaning / polishing is required to maintain the finish. We also recommend applying a dedicated alloy sealer wax to prevent future oxidation
 

	POLISHED FINISH LACQUER PERFORATED

Diamond Cut Alloy – If your wheels resemble the reflective surface on the back of a CD, then they have been diamond cut. These wheels have a pattern etched into the surface of the alloy itself. When this surface is perforated by a stone chip or kerb, the corrosion caused will work it’s way around the wheel, following the etched pattern until the whole surface is corroded and the lacquer simply flakes off.

There are a handful of specialist Engineering Firms in the UK who will restore the factory finish on your wheels but remember that the first stone chip you encounter and the damage is there!

Here at Scuffs & Scratches, we can remove the corrosion on these wheels by sand blasting where necessary. Then we coat it with a protective anti corrosion primer. Finally, we then re-finish the wheel in any colour of your choice. This is a very popular repair as the transformation is stunning and offers real value for money over the replacement.
 

	KERB DAMAGE DIAMOND CUT